Vibealert
™ Alarm Clock
Operating Instructions
Control Locations
1. Snooze Button
2. Hour Button
3. Minute Button
4. Time Set Button
5. Alarm ON/OFF/SET Switch
6. Alarm SOUND/VIB/BOTH Switch
Operation
Plug the adaptor into the power outlet,
and connect to the clock (7). The entire
display will flash meaning the incorrect
time is being displayed. This is a
normal condition and will stop when
the correct time has ben set.
PM Indicator
A dot appears in the upper left hand
corner of the display indicating that the
time shown is PM.
Alarm on Indicator
A dot appears in the lower right hand
corner of the display indicating that the
alarm has been set.
Time Setting
Press and hold the TIME SET Button
(4) and the HOUR Button (2) to
advance the hour display. Then press and hold the TIME SET Button (4) and the MINUTE
Button (3) to advance the minutes until the correct time is displayed. Be sure to set it
correctly in the AM or PM mode. The PM Indicator will be "ON" when the clock is reading
PM time and "OFF" when reading AM time.
Alarm Time Setting
Move the ALARM ON/OFF/SET Switch (5) to SET position To set the alarm, press and
hold the HOUR Button (2) and then press and hold the MINUTE Button (3) until the
correct alarm time is displayed. Be sure to set it correctly in the AM or PM mode.
To Operate Alarm (Sound and/or Vibration)
Move the ALARM SOUND/VIB/BOTH (6) to desired position - "SOUND" position for
sound alarm only, "VIB" for vibration only, or "BOTH" position for sound and vibration
alarm. The Alarm On Indicator will light up meaning the alarm is set at the preset time. To
silence the alarm, move the ALARM ON/OFF/SET Switch (5) to the "OFF" position.
Please connect the vibration pad (9) to the clock (8) for vibration alarm.
