28
PIX-25
Step 2.
Press up on the release clips then grasp the tab on the ribbon
cartridge. Pull the ribbon cartridge out of the cradle (see right-
hand Figure and arrows).
Step 3.
Insert a new ribbon cartridge and be sure to guide
the ribbon between the ribbon shield and the
printer head as illustrated (see right-hand Figure
and arrows).
Step 4.
Turn the knob on the cartridge clockwise one turn
to take up any slack in the ribbon (see right-hand
Figure).
Step 5.
Stamp a card to check the printing quality and
confirm that you have installed the ribbon cartridge
properly.
Note
– If the print mechanism is down (a piece of paper could not be
inserted), press the
RESET
button to move the carriage to the up
position. This will make the ribbon cartridge installation easier.
Figure: PIX-25 Ribbon Cradle Location.
Parts
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
