36
PIX-25
Wall Mounting (Optional)
Avoid the following:
1.
Remove the rear mounting plate from the PIX-25 and use it to mark the
three (3) mounting holes on the wall.
2.
Hang the PIX-25 rear mounting plate level on the wall using #10 wood
screws [not included] or equivalent.
3.
Verify that the cable for the AC Power Adapter is plugged into the back of
the PIX-25 before hanging it on the wall. It should already be secured
with a wire tie to the clock base.
4.
Carefully replace the cover for normal operation.
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
