PIX-25
15
3.
Press the
ENTER
button once and the clock will display the submenu for
other settings starting with
P-51 LANGUAGE
.
4.
Press the
CHANGE
button to change the current
programming mode untilo the display shows
P-56
DST BEGIN
.
5.
Press the
ENTER
button once and the clock will start flashing the
current year setting.
6.
Press the
CHANGE
button to change the current setting if desired.
7.
Press the
ENTER
button once and the month will start flashing. Press
the
CHANGE
button to change the current month value if desired.
8.
Press the
ENTER
button once and the date will start flashing. Press the
CHANGE
button to change the current date value if desired.
9.
Press the
ENTER
button once and the
month/date/year will flash with
SET DATA
displayed
on the 2
nd
line.
10.
Press the
ENTER
button once to complete the set
DST Begin Date mode and go to the previous menu.
11.
Press the
CHANGE
button once to move to next menu for setting DST
End Date.
Note
– In order for the Daylight Saving Time feature to function
correctly, both Begin and End dates need to be programmed.
Changing End Date for Daylight Saving Time (
P-57
)
Note
– The government standard for Daylight Saving is subject to
change. Your clock is factory set for correct Daylight Saving based upon
when it was manufactured, but any revision to Daylight Saving beginning
or ending dates may require updating the system-set Daylight Saving
calendar. The default end date setting = November 1, 2015 at 2:00AM,
which is the first Sunday of November, 2015.
If the current year and date has been changed, the available daylight
saving start/end date will be automatically updated as well.
The PIX-25 during DLS advance/rollback at 2:00 AM will only shift 1
hour.
If the DLS feature is enabled and the user sets the same start/end dates,
the clock will not change its time on the start/end date.
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
