PIX-25
7
Setting the Time (
P1
)
1.
With the cover removed, press and hold the
PROGRAM
button until
P1
TIME
appears to begin programming mode.
2.
Press the
ENTER
button one time. The minutes will
start flashing (the 2
nd
line will display
MINUTE
). The
seconds will automatically start at zero.
3.
Press the
CHANGE
button to increase the minutes to the desired value.
4.
Press the
ENTER
button once to accept the current
minutes and go to the hours setup mode (the 2
nd
line
will display
HOUR
). The hours will start flashing.
5.
Press the
CHANGE
button to increase the hours to the
desired value.
6.
Press the
ENTER
button once to accept the current hours and go to the
SET DATA
mode. Both the hours and minutes will start flashing.
7.
Press the
PROGRAM
button to accept the current time settings, exit
programming and return to the normal display or press the
ENTER
button to return to programming mode.
Note
– During programming the time should be set depending on
the mode the display is currently set in [either 12-hour or 24-
hour].
Setting the Date [Month/Date/Year](
P2
)
1.
With the cover removed, press and hold the
PROGRAM
button to begin
programming mode and
P1 TIME
will appear.
2.
Press the
CHANGE
button to change the current
programming mode until the display shows
P2
DATE
.
3.
Press the
ENTER
button once and the clock will
display the current Month/Date/Year (see right-
hand Figure). The year will start flashing (the 2
nd
line will display
YEAR
). Press the
CHANGE
button
to obtain the desired the year value.
4.
Press the
ENTER
button once for the month setup mode. The month will
start flashing (the 2
nd
line will display
MONTH
). Press the
CHANGE
button to obtain the desired the month value.
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
