37
5. Maintenance
(continue)
Be sure to read and understand on the page 3 to 7 “For safety operation” carefully before use
Inspecting the charging electrode
(continue)
●
3
Inspecting the charging electrode
Check it for contamination, deformation and breakage. If the
contamination is at unallowable level, clean the charging electrode
following the procedure given in the next section. If any deformed or
broken part is detected, replace the charging electrode with a new
one.
●
4
Installing the charging electrode and
shutting the inspection door
To reinstall the collecting electrode to the main unit, position it so that
cutout direction on your right side, close the inspection door.
Side of the
machine
To reinstall the collecting electrode to
the main unit, position it so that
cutout direction on your right side
from front side.
Cutout part
If the specification of opposite direction of airflow, the insertion
direction is also opposite.
Caution