![background image](http://html1.mh-extra.com/html/amano/cleam-mac-v-sigma/cleam-mac-v-sigma_operation-manual_2918238008.webp)
4
■
Control Panel
Power Lamp
Turns ON (green) when power is sup-
plied and blinks (red) when there is a
power failure.
Operation Switch
Use this switch to start and stop.
Filter Shaking Switch
Enables you to shake the filter at will (only
on automatic shakeout type).
Operation / Filter Shaking Lamp
Turns ON (green) when the blower is operat-
ing and blinks (green) during filter shaking.
Function
These switches start and stop the motor.
Press
ON
to operate the fan motor.
Press
OFF
to stop the fan motor.
ON (green)
Power ON
Blinking (red)
Blinking at 0.5-second intervals indicates abnormal voltage.
Blinking at 1-second intervals indicates a reverse-phase operation.
ON (green)
Fan operating
Blinking (green)
Blinking at 1-second intervals indicates that the unit is standing by for a
filter shaking operation.
Blinking at 0.2-second intervals indicates that the unit is performing a
filter shaking operation.
ON (green)
Fan operating
This is used for shaking down the dust adhering to the filter. Press the switch only for the
desired length of time. It does not function while the fan motor is rotating. Thus, press the
OFF
switch of the operation switch to stop the fan motor; then, press this switch. (However,
this switch is disabled for 1 minute after the operation is stopped.)
Functions of Lamps and Switches
Name
Operation Switch
Power Lamp
Operation / Filter Shaking
Lamp
(only on automatic
shakeout type)
Operation Lamp
(only on automatic
shakeout type)
Filter Shaking Switch
(only on automatic
shakeout type)
* The unit may stop running even if the power lamp is OFF. Refer to “Troubleshooting” on page 29 to identify the cause and
take a countermeasure in accordance with the troubleshooting chart.
Summary of Contents for Cleam Mac V-Sigma
Page 37: ...33 Unit mm External Dimensions...