1
To Ensure Safe Use
Before operating this equipment, please read and understand the following safety information.
Warnings
• Never use the vacuum to draw in any of the following materials.
· Explosive, flammable dust ..... Aluminum, magnesium, titanium, epoxy, organic solvents, etc.
· Combustible materials ........... Gasoline, paint thinner, benzene, kerosene, paint, etc.
· Dust containing sparks ........... Dust produced by high-speed cutters, grinders, welding ma-
chines, etc.
· Fire remnants .......................... Cigarette stubs, ashes, etc.
· Liquids ..................................... Water, oil, liquid chemicals, etc.
Entry of any of the above materials into the cleaner may result in fire or explosion.
• Do not store the unit in hazardous areas specified by law.
Doing so may result in fire or explosion.
• Never operate the cleaner where ignitable or corrosive mists, fumes, or gases are
present, explosive or flammable particles are dispersed, or in their vicinity.
Doing so may result in fire or explosion.
• Be sure to use the rated voltage only. Do not place other loads on the same power
outlet.
Incorrect voltage or multiple loads may result in fire or electric shock.
• Never insert or remove the power cable while your hand is wet.
Doing so may result in electric shock.
• Do not allow the power cord to become damaged.
Do not let heavy objects rest on the cord, and do not pull it or excessively bend it. A damaged power cord may
result in fire or electric shock.
• Never attempt to modify this equipment.
Modification may lead to fire or electric shock.
• Be sure to connect the ground.
If current leakage should occur due to failure to connect the ground, there is a risk of fire or electric shock.
There is also a risk that static electricity could cause damage to the equipment or faulty operation.
• If fire or explosion occurs within the machine, proceed as follows.
· Immediately cut off the power.
· Apply a suitable extinguishing agent.
· Do not open the tank lid and the bucket until the fire is extinguished and the internal tem-
perature lowers to the normal level.
Failure to carry out the above steps may result in a secondary explosion.
• To unplug the power cable, grasp the plug firmly and pull straight out.
Never tug on the cord itself, as this may result in electric shock.
Summary of Contents for Cleam Mac V-Sigma
Page 37: ...33 Unit mm External Dimensions...
