Amanda Amanda@Work.Group/DOS, Administrator'S Manual

Page: 27 / 264

Chapter 2:
Getting Started
Using Amanda as a Voice Server or a
Standalone System
This guide explains how to administer Amanda as either a voice server or a
standalone system. If Amanda was installed as a voice server, you can switch
back and forth between the two by typing the following at the DOS prompt:
server on
(to switch from server mode to standalone mode)
or:
server off
(to switch from standalone mode to server mode)
Press Enter.
From the DOS prompt (C:\AMANDA), you can type SERVER or AVER
and press Enter to see what mode Amanda is in. If it is already in the mode
you want, type AMANDA (and Enter) to restart Amanda.
N
OTE
: While in server mode, you can type any of the following
(then press Enter):
s To shut Amanda down
t To display a trace of Amanda’s activities
o To stop the trace to screen
p To display a list of active Amanda telephone ports
w To display a list of logged-on users
k To disconnect a user. (Type in the name of the
user when prompted for it.)