Amanda Amanda Portal CallQ Agent User Manual Download Page 7 | Manualshive

Page: 7 / 61

background image

7

3 Installing CallQ Agent

To install CallQ Agent you must have access to Amanda Portal server via the

network. After the Amanda Portal server PC is physically connected to the
network, you’ll also need to configure it appropriately for the type of network it’s
connected too.

Assign the Amanda Portal PC a TCP/IP address, appropriate subnet, gateway

and dns (if applicable). Then do one of the following:

If Connecting Amanda Portal To a Domain

If the network is a domain, the Amanda Portal PC will need an account to log
into that domain in order to be trusted by other computers on the network, and

for the Amanda Portal PC to trust users logged into the domain. See your
network administrator for assistance with configuring the Amanda Portal PC for

the domain.

If Connecting Amanda Portal to a Workgroup

If your connecting Amanda Portal to a workgroup you’ll need to create at least

one account on the Amanda Portal PC within control panel “Users and
Passwords” in order to access shares on the Amanda Portal PC. The created
user and password can later be used when trying to access the Amanda Portal

server PC shared folders. This is required because there is no centralized
security in a workgroup environment.

Once you can Access the Shared Clients folder

Access your Amanda Portal server through “Network Neighborhood” or “My
Network Places”. Once you find the Amanda Portal system (normally called

Amandaserver), double click on it. You’ll see a shared folder called “Clients”.
Open the shared Clients folder. Double click “ClientsInstall” to start the
installation procedure. Read through the details for each screen before

proceeding with the install. It’s recommended that you choose all the default
options except for which clients you wish to install.

«
...
5
6
7
8
9
...
»

Summary of Contents for Amanda Portal CallQ Agent






























































Reviews:

No comments

Related manuals for Amanda Portal CallQ Agent

NETWORK SATELLITE SERVER 4.0.5

Brand: Red Hat Pages: 82

MAGICTWINXP-R10

Brand: JETWAY Pages: 43

FLASH MEDIA SERVER 2-INSTALLING FLASH MEDIA SERVER...

Brand: MACROMEDIA Pages: 16

Electric Bass Vol. 1—Rock

Brand: M-Audio Pages: 4

08011-41-UD2-003

Brand: Canon Pages: 176

Brand: Vonamic Pages: 31

RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND

Brand: Tech Source Pages: 2

Brand: GRASS VALLEY Pages: 2

Brand: GRASS VALLEY Pages: 24

AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1

Brand: GRASS VALLEY Pages: 66

STUDIO 8-EXPLORING STUDIO 8

Brand: MACROMEDIA Pages: 350

LogiCORE 1000BASE-X

Brand: Xilinx Pages: 230

ViaVoice Simply Dictation for Mac OS X

Brand: IBM Pages: 92

ThinkCentre Edge 91

Brand: Lenovo Pages: 262

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 4

ThinkPad Z60t Series

Brand: Lenovo Pages: 166

ThinkPad X60 Tablet

Brand: Lenovo Pages: 206

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands