Amada Miyachi Unitek STA-100A, Operation Manual, Page: 83 / 154

STA SERIES AC CONTROLS
990-351 B-1
APPENDIX B
ELECTRICAL AND DATA CONNECTIONS
Section I. Electrical Connections
WARNING : The installer must make electrical connections in accordance to all applicable codes.
NOTES:

Make sure you are familiar with the Control’s internal components and where they are located
(see
Chapter 1, Description ).

Make sure you know where the power connection points are. (See Page B-2 , Electrical Power
Connections .)

Make sure you know the appropriate circuit breaker rating for your control. (See Appendix C,
SCR, Wire Gauge, and Circuit Breaker Selection .)

Make sure you know how to make the
Emergency Stop
connections.

Power and signal connections are made through the customer-provided punch-out holes in the
Control.