Amada Miyachi Unitek STA-100A, Operation Manual, Page: 123 / 154

APPENDIX J: COMMUNICATION OPTION
STA SERIES AC CONTROLS
990-351 J-7
NAME COMMAND DATA SIZE
MONITOR “MR” Read Read Schedule # 1 Byte
MONITOR “MS” Set
Set SCHEDULE # 1 Bytes
HIGH1C # High current #1% 2 Bytes
HIGH2C # High current #2% 2 Bytes
LOW1C # Low current #1% 2 Bytes
LOW2C # Low current #2% 2 Bytes
ANGLE LIMIT 1 Conduction limit #1 1 Byte
ANGLE LIMIT 2 Conduction limit #2 1 Byte
LIMIT # Weld Count limit 2 Bytes
START start value 1 Byte
MODE weld mode 1 Byte
LOP Low Pressure Limit (0-9999) 2 Bytes
HIP High Pressure Limit 2 Bytes
VOLTHIW1 W1 High Volt Limit (0.00-9.99) 2 Bytes
VOLTLOW1 W1 Low Volt Limit 2 Bytes
VOLTHIW2 W2 High Volt Limit 2 Bytes
VOLTLOW2 W2 Low Volt Limit 2 Bytes
27 Bytes Total
-------------------------------------------------------------------------
start value: MAINTAINED = 0
or PULSED = 1
or LATCHED = 2
or SEAM =3
-------------------------------------------------------------------------
weld mode: SPOT = 0
or REPEAT = 1
or SUCCESSIVE = 2
or CHAINING = 3
-------------------------------------------------------------------------