Amada Miyachi Unitek STA-100A, Operation Manual, Page: 39 / 154

CHAPTER 3: USING STA SERIES CONTROL FUNCTIONS
STA SERIES AC CONTROLS
990-351 3-11

CONT SEAM MODE
(optional) - The continuous seam mode repeats the weld cycle from
COOL
through
WELD2
as long as the start signal is present. See Appendix D for a graphical
representation of this weld mode.

ROLL SPOT MODE
(optional) - The roll spot seam mode repeats the weld cycle from
SQUEEZE
through
OFF
as long as the start signal is present. See Appendix D for a graphical
representation of this weld mode.
LINKED SCHED

-- Placing the cursor at the

symbol, and pressing the
DATA+
key will cause the
Linked Schedule screen to be displayed.