Amada Miyachi Unitek STA-100A, Operation Manual, Page: 77 / 154

CHAPTER 5: MAINTENANCE
STA SERIES AC CONTROLS
990-351 5-13
Section VI. Repair
If you have problems with your unit that you cannot resolve, please contact our service department at the
address, phone number, or e-mail address indicated in the Foreword of this manual.
Section VII. Storage and Shipment
Preparation for Storage or Shipment
WARNING: Be sure all power is removed from the Control before disconnecting input (LINE) cables.
1 Open the Control door and disconnect all line and load wires.
2 Disconnect all signal wires
3 If a secondary current sensor is used, disconnect the signal cable from the connector(s) on the
bottom of the Control.
4 If SCR is water-cooled, turn off water source and disconnect the water hoses to the Control.
Using shop air, dry out the water-cooling chamber of the SCR
5 Remove the Control from its mounting location.
Packing for Storage or Shipment
Repack the Control into the original packing materials and packing box in which you originally received
the unit.