AMA Instruments The GC 5000 BTX, Operating Manual, Page: 63 / 152

Operating Manual GC 5000 BTX; Version 5 – 11/2010 61
How to run initial validation:
1. Select
Menu bar Run validation Initial validation
Note
Before running a standard validation for the first time, an initial validation
has to be performed. As well it is necessary to run an initial validation after
each calibration. An initial validation has to be performed at any time, when
the validation gas has been changed.
Depending on the setting for “run initial validation after auto-calibration or
manual sequence” (see check box on window below)
the analyzer will run automatically an initial validation either directly when a
calibration sequence has been completed or during the next scheduled
validation run.
How to run standard validation:
There are two possibilities to run a standard validation. It depends on
whether to run it manually or automatically.
1. Start a run manually: select
Menu bar Run validation Standard validation
Alternatively:
2. Start an automatic run:
Press the “ Start ” button on the main screen.
The validation starts after the specified cycles or time as this parameter
have been set in the validation setup.
2. Step:
Run initial
validation
Automatic
initial validation
3. Step:
Standard
validation