Operating Manual GC 5000 BTX; Version 5 – 11/2010
35
6.5.3 Gesytec specifications
Menu bar
Parameters
Remote control
Gesytec specifications
In this menu you can modify the parameters for the communication via the
Gesytec II protocol.
Parameters
Remote control
Gesytec specifications
Service mode:
The service mode has to be activated before doing maintenance work while
the analyzer is operating. Then the analyzer does not accept any control
commands from the PC of the monitoring station. In this case controlling is
only possible by the analyzers software but results and status are still
transmitted.
6.5.4 Modifying of parameters under “Gesytec specifications”:
Remote control
Gesytec specifications
COM Parameter:
This interface will be used for data transfer between analyzer and
monitoring station main computer via the Gesytec II protocol. For this
purpose, the transfer speed can be selected in a range of 1200 to 19200
Baud.
The default value is „9600“.
•
The
Save value
menu makes the inputs active.
•
With the
Quit
button you can leave this window without any change.
COM
Parameter
Summary of Contents for The GC 5000 BTX
Page 1: ...Operating Manual Gas chromatograph GC 5000 BTX...
Page 35: ...Operating Manual GC 5000 BTX Version 5 11 2010 33 Fig 5 Connection of analog outputs...
Page 102: ...Operating Manual GC 5000 BTX Version 5 11 2010 100 Injection Waiting for end of cycle time...
Page 105: ...Operating Manual GC 5000 BTX Version 5 11 2010 103 Injection Waiting for end of cycle time...