SW1000 Installation and Operation Instructions
Page 34
For Assistance: [email protected] +1 (909) 591-8431 PUD3448R2-1
TB2-3, TB3-4 (Master Gate)
Figure A3
TB4-1, TB4-2 (Slave Gate)
Figure A4
DC Power Crossover Cable
DC power is run from the master gate to the slave gate using the DC power crossover cable
(10-1353)
. Follow the
instructions below to connect DC power to the slave gate.
1. Locate the DC power crossover cable shipped with
the slave gate.
2. On the master gate, connect the spade connectors
to TB2-3 (red) and TB2-4 (black) [Figure A3].
3. On the slave gate, connect the bare wires to TB4-1
(black) and TB4-2 (red) [Figure A4].
TB1
TB2
TB3
TB9