SW1000 Installation and Operation Instructions
Page 10
For Assistance: [email protected] +1 (909) 591-8431 PUD3448R2-1
The following slab requirements must be taken into consideration when determining an installation location:
• The gate must be installed on a solid, level concrete pad with a minimum thickness of 4" (102mm).
The following space requirements must be taken into consideration when determining the installation location:
• Allocate 4" (102mm) of space between the back of the tower and adjacent wall or other surface.
• Allow a minimum of 2" (51mm) of clearance between the end of the barrier and adjacent surface to avoid
pinch points.
Pre-Installation
Assembled Gate Dimensions
Figure 3
Base Dimensions
Figure 4
Refer to Appendix A for information and instructions specific to SW1000T tandem gate installations.
NOTE
Slab Requirements
Space Requirements
