Alta Motors Redshift MX 2017, Owner'S Service Manual

Page: 97 / 122

97
RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS
5. Place the gear on the correct shaft, with the flange
facing inwards. ( Fig. 34 & 35 )
6. Apply Loctite 243 to the threads of the countershaft
or the threads of the bolt, and then install the washer
and nut (driven gear washer) or the washer and bolt
(drive gear) in the direction indicated. Tighten the
drive gear nut to 95 Nm. Tighten the driven gear bolt
to 31 Nm.
7. Install the gearbox cover ( SEctioN 11 ).
8. If installed, remove the output shaft holding tool,
and install primary drive sprocket ( SEctioN 7 ) and the
drive chain ( ChaptER 4 ).
9. Install the boot guard ( ChaptER 7 ).
10. Fill the gearbox with the proper type and quantity
of lubricant ( SEctioN 11 ).
Fig. 34 Fig. 35
HIGH VOLTAGE BATTERY AND DRIVE SYSTEM