58
1.
Push the dust cover back to expose the pivot bolt (MX
models). Unscrew the pivot bolt locknut from the
underside of the lever perch, and unscrew the pivot bolt
from the top side. (
Fig. 63
)
2.
Detach the lever from the perch.
3.
Transfer the pushrod to the new lever.
4.
Clean the pivot bolt, and lubricate it with silicone-
based or lithium-based grease.
5.
Lubricate the pushrod with silicone-based brake grease.
6.
Install the lever to the perch, and insert the pushrod
into the master cylinder dust boot. Make sure the boot
seats around the ridge on the pushrod. (
Fig. 64
)
BRAKE LEVER -
REMOVAL & INSTALLATION
Fig. 34
Fig. 31
Fig. 64
Fig. 63
CHAPTER 3
