Alta Motors Redshift MX 2017, Owner'S Service Manual

Page: 74 / 122

74
RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS RETURN TO TABLE OF CONTENTS
CHAPTER 5
COOLING SYSTEM
COOLING SYSTEM - DRAIN & REFILL
1. Remove the coolant fill plug cover at the front of the
Delta wing.
2. Remove the fill plug.
3. Place a drain pan under the center of the bike.
Unscrew the drain plug (A), and allow the coolant to
drain. The drain plug is located on the rear bulkhead
(RBH) above the right-side swingarm pivot. Tilt the
bike upright to ensure complete draining.
NotE: EaRly-build modEls haVE a shoRt dRaiN hosE
attachEd to thE dRaiN plug; diREct thE hosE iNto thE
dRaiN paN. LatER-build modEls haVE a dRaiN plug
with No hosE.