Alpine INE-S900R Owner'S Manual Download

Page: 43 / 151

-EN

Save as Address Book

Up to 200 addresses can be stored in Address Book.

Touch [Option] on the Confirm destination screen.

The point display screen is displayed.
Or, scroll the map by the desired point to display the point
display screen.

Touch [

The Edit address book screen is displayed.

Touch [Save].

•

You can modify items in Address Book. For details, see
“Editing the Address Book” (page 49).

The system returns to the screen of the step 3.

•

You cannot touch [Option] while driving.

Save as Home

Touch [Option] on the Confirm destination screen.

The point display screen is displayed.
Or, scroll the map by the desired point to display the point
display screen.

Touch [

The Edit home screen is displayed.

Touch [Save].

•

You can modify items in Home. For details, see “Editing
the Home” (page 52).

•

You can register only one “home”.

•

You can not touch [Option] while driving.

Downloaded from Caradio-Manual.com Manuals

Summary of Contents for INE-S900R
























































































































































Search results

Summary of Contents for INE-S900R

Reviews:

Related manuals for INE-S900R

Brands by name

Popular brands

Alpine INE-S900R, Owner'S Manual

Search results

Summary of Contents for INE-S900R

Reviews:

Related manuals for INE-S900R

Brands by name

Popular brands