141
-EN
1
GPS Antenna Receptacle
To GPS Antenna.
2
USB Connector
To USB Memory or iPod/iPhone.
3
Power Supply Connector
4
AUX/PRE OUT Connector
5
External Interface Connector
6
iPod VIDEO Input Connector
Connect this to KCU-451iV.
7
Antenna Receptacle
8
Vehicle Display Interface Connector
Outputs Vehicle Display Interface control signals. Connect
this to the optional Vehicle Display Interface box.
For details about connections, consult your nearest Alpine
dealer.
9
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
0
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
!
Video Input Connector (AUX INPUT) (Yellow)
Input the video.
@
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left input the audio.
#
Rear Output RCA Connectors
It can be used as Rear Output RCA Connectors.
$
Front Output RCA Connectors
It can be used as Front Output RCA Connectors.
%
Subwoofer RCA Connector (Left) (White)
Outputs the subwoofer signal.
^
Subwoofer RCA Connector (Right) (Red)
Outputs the subwoofer signal.
&
CAMERA Input Connector
Use when connecting an optional rear camera (HCE-
C107D).
*
RCA Extension Cable (Sold Separately)
(
Reverse Lead (Orange/White)
Connect to the plus side of the car’s reverse lamp. This
lamp illuminates when the transmission is shifted into
reverse (R).
With this lead properly wired, the video picture
automatically switches to the rear camera whenever the car
is put into reverse (R).
)
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INE-S900R.
-
Speed Sensor Lead (Green/White)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
=
ISO Power Supply Connector
q
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
the INE-S900R to dim whenever the vehicle’s lights are
turned on.
w
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
e
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
r
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
!
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
y
Fuse Holder (15A)
u
Left Rear (+) Speaker Output Lead (Green)
i
Left Rear (–) Speaker Output Lead (Green/Black)
o
Left Front (+) Speaker Output Lead (White)
p
Left Front (–) Speaker Output Lead (White/Black)
[
Right Front (–) Speaker Output Lead (Grey/Black)
]
Right Front (+) Speaker Output Lead (Grey)
\
Right Rear (–) Speaker Output Lead (Violet/Black)
a
Right Rear (+) Speaker Output Lead (Violet)
s
ISO Connector (Speaker Output)
d
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
f
Audio Interrupt In Lead (Pink/Black)
When it is an audio input from the connected external
device, this device is muted. The “IN-INT” icon is displayed
at this time.
g
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
h
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
j
MIC Input Connector
To Microphone (Included).
k
ISO/JASO Antenna Adapter (Sold Separately)
ISO/JASO Antenna Adaptor may be required, depending on
the vehicle.
