manualshive.com logo in svg

Alpine INE-S900R, Owner'S Manual

Share
Download
Alpine INE-S900R Owner'S Manual Download Page 131

129

-EN

Audio/Visual

Playing back a DRM protected DivX

®

 File

Some operations cannot be performed while displaying the following message.

Route search failure.

Calculation of the route failed, because it is too 
far from the destination.

Set a shorter distance to the destination.

Unable to calculate the final part of your route, 
as there are no roads on the database close 
to your destination.
Set your destination closer to a road on the 
map.

Search of the destination failed, because there 
are no roads on the database close to your 
destination.

Set the destination closer to a road on the 
map.

Unable to calculate the start of your route, as 
there are no roads on the database close to 
your vehicle position.
Drive to the nearest road.

Search of the destination failed, because there 
are no roads on the database close to your 
vehicle position.

Set the destination after commencing driving.

Message

Cause

Solution

Communication error to DVD mechanisum.

An access error to DVD drive occurred for 
some reasons.

Please ask Service Centre for help.

You are not permitted to play these contents 
in this region.
Please check Disc.

Disc does not match regional code number.

Load a disc that matches the regional code 
number.

Error between communication with iPod.

Communication error.

• Disconnect iPod/iPhone from the unit, and 

then reconnect it.

• Turn the ignition key off, and then set to ON 

again.

• Check the display by reconnecting between 

the iPod/iPhone and this unit, using the iPod 
cable.

Message

Cause

Solution

Authorization Error
This player is not authorized to play this video.

The version of the DRM protected DivX

®

 File is 

not supported by this unit.

Play the supported DivX

®

 File.

Rental Expired

There is a rental file in the DivX

®

 that is set to 

audio/visual times. If audio/visual time is 
counted as 0, this message is appears. After 
the message has been displayed, the 
beginning of the next file will automatically be 
played back.

–

View DivX

®

 VOD Rental

This rental has [XX] views left.
Do you want to use one of your [XX] views 
now?

If audio/visual times still remain, the remaining 
number of playback times is displayed.

To play back, select [Yes]. If the next file is to 
be played back, select [No].

Do you wish to stop playing rental file?

While playing back a rental file, “Do you wish to 
stop playing rental file?” is displayed when the 
following operations are performed, and the 
rental file playback is interrupted (audio/visual 
times are reduced by 1).
• Folder Up/Down
• STOP
• Search operation
• Move to the first/last DivX

®

 file by Chapter 

Up/Down

To interrupt the playback, select [Yes], or select 
[No] to not be interrupted.

Message

Cause

Solution

Downloaded from Caradio-Manual.com Manuals

Summary of Contents for INE-S900R
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands