Alpine INE-S900R Owner'S Manual Download Page 144

Page: 144 / 151

142

-EN

System Example

Connection of a USB Memory

•

You cannot connect both a USB memory and an iPod/iPhone at the same time.

•

Do not leave the iPod in a vehicle for a long time. Heat and humidity may damage the USB memory and you may not be able to play it again.

Connection of an iPod/iPhone

•

To connect an iPod/iPhone, an optional connection kit KCU-451iV is required.

•

You cannot connect both an iPod/iPhone and a USB memory at the same time.

•

Do not leave the iPod/iPhone in a vehicle for a long time. Heat and humidity may damage the iPod/iPhone and you may not be able to play it again.

USB connector

USB Memory (Sold separately)

USB cable (Included)

USB connector

iPod VIDEO connector

USB cable (Included)

Connection kit KCU-451iV
(Sold separately)

iPod/iPhone
(Sold separately)

Downloaded from Caradio-Manual.com Manuals

Summary of Contents for INE-S900R
























































































































































Search results

Summary of Contents for INE-S900R

Reviews:

Brands by name

Popular brands

Alpine INE-S900R, Owner'S Manual

Search results

Summary of Contents for INE-S900R

Reviews:

Brands by name

Popular brands