63
-EN
Deleting a BLUETOOTH Device from the list
You can delete the history of a previously connected
BLUETOOTH compatible device.
Setting item: Clear Device
1
Touch the BLUETOOTH compatible device you want
to delete from the Clear Device list.
A message is displayed.
2
Touch
[Yes]
if you want to delete.
•
Touching
[No]
will cancel the setting.
•
The registration number 5 is deleted once the ignition key goes from
ACC to OFF.
Displaying the phone service provider name
Setting item: Service Provider
The service provider name of the connected BLUETOOTH
compatible device will be displayed. If a BLUETOOTH
compatible device is not connected, “ID Unsent” will be
displayed.
•
Depending on the character type some phone service provider name
cannot be displayed.
Setting the Search Mode
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to Visible
Mode ON.
Setting item: Visible Mode
•
Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it
automatically or not.
Setting item: Auto Answer
•
If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
•
If a second call caution is displayed, auto calling is unavailable even
if Auto Answer is set to “ON”.
Selecting the output speaker
You can select the connected speaker in car to output the sound
signal of telephone.
Setting item: Speaker Select
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
•
When an IMPRINT audio processor (PXA-H100) or External Audio
processor (PXA-H701, etc.) is connected, the default setting All will
be set and cannot be adjusted.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume
level.
Setting item: MIC Input
Touch
[
]
or
[
]
to select the desired volume level (0 ~ 7).
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
•
The setting can be adjusted only when the BLUETOOTH compatible
device is connected.
Displaying the firmware version
Setting item: Firmware Version
The current firmware version will be displayed.
Updating the firmware
Setting item: Firmware Update
Future BLUETOOTH firmware update (for phone compatibility) at
customer end will be available for this unit.
For information to update your BLUETOOTH firmware, please
visit your local Alpine web site or choose your country from
Alpine Europe top page (http://www.alpine-europe.com).
Setting the Hang Up Mode
When there’s an inserted call, Hung UP button is displayed in the
bottom right of the navigation screen during a phone call.
Setting item: Hung Up
Turning the Echo Cancel ON or OFF
Setting item: Echo Cancel
The echo of hands-free phone will be avoided correspondingly
by setting the Echo Cancel to ON.
ON:
Enables recognition of this unit from the BLUETOOTH
compatible device.
OFF:
Disables recognition of this unit from the BLUETOOTH
compatible device.
ON:
When a call is received, it will be taken automatically after
about 5 seconds.
OFF:
When a call is received, it will not be received
automatically. If a message is displayed and
[
]
is
touched when a call is received, you can receive the call.
All:
The sound be output from all of speakers in car.
F-L:
The sound only be output from the front left speaker.
F-R:
The sound only be output from the front right speaker.
F-LR:
The sound be output from the front left and front right
speaker.
ON:
The
[
]
is displayed.
OFF:
The
[
]
is not displayed.
