22
-EN
•
Refer to page 43 about “PI Seek Setting”, “Receiving RDS Regional
(Local) Stations”, “Switching the Display Language of PTY
(Programme Type)” and “Setting PTY31 (Emergency Broadcast)
Reception”.
Receiving Traffic Information
Press and hold
AUDIO
/TA
for at least 2 seconds to
turn on the Traffic Information mode.
When the traffic information station is tuned in, the TA indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “T. Info”.
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
•
If the traffic information broadcast signal falls below a certain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 70 seconds, “TA” blinks in the display.
•
If you do not want to listen to the traffic information being received,
lightly press
MAP
to skip that traffic information message. The
T. INFO mode will remain in the ON position to receive the next
traffic information message.
•
If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
PTY (Programme Type) Tuning
RDS SETUP mode
1
Touch
[PTY]
on the screen.
FM Radio mode
1
Touch
[DX SEEK]
*
to choose the PTY tuning mode.
The PTY mode is activated.
The Programme Type of the station being currently received
will be displayed.
* The button displays the current tuning mode.
2
Touch
[
]
or
[
]
after activating the PTY mode to
choose the desired programme type while “PTY”
(programme type) is displayed.
Each press scrolls the programme type by one.
RDS SETUP mode
3
Touch
[PTY]
after selecting the programme type to start
searching for a station of the selected programme type.
FM Radio mode
3
Touch
[PTY SEARCH]
after selecting the
programme type to start searching for a station of
the selected programme type.
If no station is found, “NO PTY” will be displayed.
Receiving Traffic Information While
Playing CD or Radio
The example explained here is how to receive the traffic information
broadcast during CD playback.
1
In the CD mode, press and hold
AUDIO
/TA
for
at least 2 seconds to turn on the Traffic information
mode.
The unit automatically starts to search the receivable traffic
broadcasts.
When the traffic information broadcast is searched out, the
CD mode is switched to the Radio mode and the unit
receives the traffic information broadcast.
•
When the traffic information broadcast starts, the unit
automatically mutes the CD.
•
When the traffic information broadcast finishes, the unit
automatically returns to the original source you were
playing before the traffic information broadcast began.
•
The receiver is equipped with the EON (Enhanced Other Networks)
function so if the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station
that broadcasts the traffic information.
2
When the traffic information broadcast has finished,
the unit returns to the CD mode.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Touch
[NEWS]
on the RDS setup screen to activate
the PRIORITY NEWS mode.
The “NEWS” indicator appears in the display. Touch
[NEWS]
again to deactivate the Priority News mode and
return to the programme you were previously listening.
2
Touch
[
]
to return to the previous screen.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Tune in a radio station that transmits text messages.
2
Touch
[INFO.]
in the FM radio mode to activate the
Radio Text mode.
3
To change the Radio Text display, touch
[INFO.]
.
•
If there is no receivable text message or the unit cannot receive a text
message properly, the display is blank.
