Page 16
AM-64x DAT High Capacity Tape Drives
PDI-00649-00, A01
DWF-20218-00
MAKE SURE
THE DRIVE'S
FRONT
P
ANEL
IS POINTED IN
THE
DIRECTION INDICA
TED BY
THE
ARROW
A
B
C
C
B
A
SCSI DAT OR STREAMING TAPE DRIVE, or
ANY 5-1/4" HALF-HEIGHT SCSI HARD DISK DRIVE
AM-645 FULL-HEIGHT 8MM MAGNETIC TAPE DRIVE, or
ANY 5-1/4" FULL-HEIGHT SCSI HARD DISK DRIVE
ANY 5-1/4" HALF-HEIGHT FLOPPY DISKETTE DRIVE, or
ANY 5-1/4" HALF-HEIGHT SCSI HARD DISK DRIVE
Figure 10 - Plastic Mounting Base
6. Set the metal support bracket on top of the drive assembly as shown in Figure 9. Position the
bracket so the mounting hole (see Figure 11) aligns with the screw hole on the side (top) of the
DAT drive and the screw hole in the metal support bracket aligns with the screw hole in the
front bezel.
