Page 28
AM-64x DAT High Capacity Tape Drives
PDI-00649-00, A01
Creating a Sample WRMGEN File
LOG SYS:
RETURN
WRMGEN
RETURN
Warm Boot Monitor Generator X.X(XXX)
Input monitor: AMOS32.MON
RETURN
System disk driver: SCZRR.DVR
RETURN
Number of logical units: 10
RETURN
Bitmap size: 3969
RETURN
Language definition table name:
RETURN
;Pressing RETURN defaults to English
SCSI dispatcher (RETURN if none): SIMRR.SYS
RETURN
;Simple only!
System terminal interface driver: AM318.IDV
RETURN
System terminal interface port number: 0
RETURN
System terminal interface baud rate: 19200
RETURN
System terminal driver: AM65.TDV
RETURN
Enter name of SECONDARY DEVICE(s) to be defined into system,
one per line. Enter blank to terminate loading.
Device to define: /DAT0
RETURN
Device to define: TRM
RETURN
Device to define:
RETURN
Enter name of program(s) to be preloaded into SYSTEM MEMORY,
one per line. Enter blank to terminate loading.
Program to load: SYSMSG.USA
RETURN
Program to load: DAT.DVR[1,6]
RETURN
Program to load: CMDLIN.SYS
RETURN
Program to load: SCNWLD.SYS
RETURN
Program to load:
RETURN
Enter name of program(s) to be preloaded into USER PARTITION,
one per line. Enter blank to terminate loading.
Program to load: MOUNT.LIT
RETURN
Program to load: LOG.LIT
RETURN
Program to load: DIR.LIT
RETURN
Program to load: COPY.LIT
RETURN
Program to load: DUMP.LIT
RETURN
Program to load: MTURES.LIT
RETURN
Program to load: MTUDIR.LIT
RETURN
Program to load: FMTSCZ.LIT
RETURN
Program to load: FMTSCZ.OVR
RETURN
Program to load: DSKANA.LIT
RETURN
Program to load: DSKDDT.LIT
RETURN
Program to load: SYSACT.LIT
RETURN
Program to load:
RETURN
;after you enter this return, your
.WRM file will be created on disk.
When you want to warm boot from the DAT drive, you must set the alternate Boot ID switches on the
back panel of your computer chassis. The correct switch settings for each of the supported CPU types
are shown in Figure 17.
