Figure 9 Unpacking the Inverter and Battery
Figure 10 Battery Positive
and Negative port
Figure 11 Battery Power Cable
Installation Diagram
Figure 12 Assemble Battery Mounting Panel
Step 3
Assemble the battery mounting panel on the battery.
Step 4
Position the battery parallel to the wall and use a Φ8mm drill to drill holes to a depth of
about 70mm in the wall for subsequent fixation of the mounting plates.
2.2 Installation
2.2.1 Battery Installation
Step 1
Remove the battery and inverter from the packaging box.
Step 2
Connect the power cable at the top, which are included in the parts list of SMILE5-BAT.
M5*10 Screws
Figure 13 Battery Installation - Drill Holes
Step 5
Remove the WiFi panel on the top and install the WiFi module (tool: T20 screwdriver,
torque: 1.6Nm). Please refer to section 5 configuration network instructions.
Figure 14 WiFi Module Installation
INSTALLATION
INSTALLATION
Positive
Negative
WiFi Panel
Drill φ8, depth about 70 mm
12
13
