AVT GigE Cameras Installation Manual V1.1.0
44
Implementing link aggregation
–
Select team type
: Static Link Aggregation
click
Next
This configures the team and a new adapter appears in the Network Connections
window.
[Linux]
Link Aggregation is referred to as bonding in Linux. The following instructions
are for Ubuntu Linux 10.04 or newer.
– Download ifenslave module
–
Terminal
: sudo apt-get install
ifenslave
–
Terminal
: ifconfig
– Note eth#'s of NICs to be bonded
–
Terminal
:
sudo gedit /etc/network/interfaces
–
Add/edit
:
auto bond0
iface bond0 inet static
address 169.254.100.101
netmask 255.255.0.0
bond-slaves eth6 eth7
bond_mode 0
mtu 8228
where,
eth6
and
eth7
are the
NICs to be bonded.
Figure 35: Team wizard team type selection
Note
The newly formed team adapter can be managed
using automatic IP configuration or fixed IP using
instructions provided in
Modifying Ethernet adapter
IP address
on page 17.
www
For full installation instructions on Ubuntu, see:
https://help.ubuntu.com/community/UbuntuBonding
https://help.ubuntu.com/community/LinkAggregation
Figure 36: Interfaces file for bonding
