AVT GigE Cameras Installation Manual V1.1.0
25
Starting the camera
Starting the camera
Power up
A camera power adapter for each GigE camera is available from Allied Vision.
Please consult the camera technical manual for connector definition and volt-
age specifications
Connect to host application
Use a Category 6 or higher rated Ethernet cable to connect the camera to the
host adapter. Crossover cabling is not required, but works—the camera has cir-
cuitry to determine if a crossover cable is being used.
www
Allied Vision Product literature
http://www.alliedvision.com/en/support/technical-
documentation
Caution
For Goldeye G, Prosilica, Mako, and Manta cameras:
•
Use only DC power supplies with insulated cases.
•
For all power connections use only shielded cables to
avoid electromagnetic interferences.
•
Goldeye G, Mako, Manta, and Prosilica GT PoE models can
source power from:
– 802.3af (100 MBit/s and 1000 MBit/s), and
– 802.3at compliant PSE devices (Power Sourcing Equip-
ment): such as switches injectors or NICs
Caution
Bigeye G cameras
Operate Bigeye G cameras at
12 V (+ 5 %)
. The current is lim-
ited to
max. 3.0 A
. Operating Bigeye G cameras
outside these
specifications may cause damage
.
www
Accessories:
Please contact Allied Vision sales representative or your local
Allied Vision dealer for information on accessories:
http://www.alliedvision.com/en/about-us/where-we-
are.html
