Allied Telesis AT-x550-18XSPQm, Installation Manual

Page: 46 / 190

Chapter 1: Overview
46
Console Port
The Console port is an RS232 serial management port. You use the port
to access the AlliedWare Plus management software on the switch to
configure the feature settings or monitor status or statistics. This type of
management is commonly referred to as local management because you
have to be at the physical location of the switch and use the management
cable included with the unit. The switch does not have to have an IP
address for local management.
To establish a local management session with the switch, you use the
provided management cable to connect a terminal or a personal computer
with a terminal emulation program to the Console port, which has an
RJ-45 style (8P8C) connector. The cable has RJ-45 style (8P8C) and
DB-9 (D-sub 9-pin) connectors.
The Console port has the following settings:

Default baud rate: 9600 bps (range is 9600 to 115200 bps)

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None
Note
These settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.