Configuring Internet Protocol Version 6
Page 30
•
Domain Name Query Interval
(10-3600) — Specifies the interval between DNS Queries (before the IP
address of the ISATAP router is known) for the automatic tunnel router domain name. The range is 10 - 3600
seconds. The default is 10 seconds.
•
ISATAP Router Solicitation Interval
(10-3600) — Specifies the interval between router solicitations
messages when there is no active router. The range is 10 - 3600 seconds. The default is 10.
•
ISATAP Robustness
(1-20) — Specifies the number of DNS Query/ Router Solicitation refresh messages
that the device sends. The range is 1 - 20 seconds. The default is 3.
2.
Click
Apply
. The Tunnel is defined, and the device is updated.
Defining IPv6 Neighbors
The
IPv6 Neighbors Page
contains information for defining IPv6 Neighbors which is similar to the functionality of
the IPv4 Address Resolution Protocol (ARP). IPv6 Neighbors enables detecting Link Local addresses within the
same subnet, and includes a database for maintaining reachability information about the active neighbors paths.
The device supports a total of up to 256 neighbors obtained either statically or dynamically.
When removing an IP interface, all neighbors learned statically and dynamically are removed.
To define IPv6 Neighbors:
1.
Click
System > IPv6 Neighbors
. The
IPv6 Neighbors Page
opens.
Figure 14: IPv6 Neighbors Page
