Allied Telesis AT-S95, User Manual

Page: 174 / 246

Configuring SNMP
Page 174
SNMPv1,2c Notification Recipient
The SNMP v1, v2c Recipient table contains the following fields:
•
Recipients IP Address — Displays the IP address to which the traps are sent.
•
Notification Type — Displays the type of notification sent. The possible field values are:
–
Trap — Indicates that traps are sent.
–
Inform — Indicates that informs are sent.
•
Community String — Displays the community string of the trap manager.
•
Notification Version — Displays the trap type. The possible field values are:
–
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
–
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
•
UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.
•
Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field
range is 1-300. The default is 15 seconds.
•
Retries — Indicates the number of times the device resends an inform request. The field range is 1-255.
The default is 3.
SNMPv3 Notification Recipient
The SNMPv3 Notification Recipient table contains the following fields:
•
Recipients IP Address — Displays the IP address to which the traps are sent.
•
Notification Type — Displays the type of notification sent. The possible field values are:
–
Trap — Indicates that traps are sent.
–
Inform — Indicates that informs are sent.
•
User Name — Displays the user to which SNMP notifications are sent.
•
Security Level — Displays the means by which the packet is authenticated. The possible field values are:
–
No Authentication — Indicates that the packet is neither authenticated nor encrypted.
–
Authentication — Indicates that the packet is authenticated.
•
UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.
•
Filter Name — Includes or excludes SNMP filters.
•
Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field
range is 1-300. The default is 15 seconds.
•
Retries — Indicates the number of times the device resends an inform request. The field range is 1-
255.The default is 3.