Configuring Ports
Aggregating Ports
Page 112
Configuring LACP
Trunk ports can contain different media types if the ports are operating at the same speed. Aggregated links can
be set up manually or automatically established by enabling
Link Aggregation Control Protocol
(LACP) on the
relevant links. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports
with the same speed. The
LACP Page
contains fields for configuring LACP trunks.
To configure LACP for trunks:
1.
Click
Layer 1 > LACP
. The
LACP Page
opens:
Figure 69: LACP Page
The
LACP Page
contains the following fields:
•
LACP System Priority
— Specifies system priority value. The field range is 1-65535. The field default is 1.
•
Unit Number
— Displays the stacking member for which the trunk parameters are defined.
•
Port
— Displays the port number to which timeout and priority values are assigned.
•
Port Priority
— Displays the LACP priority value for the port. The field range is 1-65535.
•
LACP Timeout
— Displays the administrative LACP timeout. The following options are available:
Short
and
Long
(default).
