Allied Telesis AT-S95, User Manual

Page: 104 / 246

Configuring Ports
Setting Ports Configurations
Page 104
•
Status — Indicates if the port is currently monitored. The possible field values are:
–
Active — Indicates the port is currently monitored.
–
Ready — Indicates the port is not currently monitored.
2. Click Add . The Add Port Mirroring Page opens:
Figure 63: Add Port Mirroring Page
The Add Port Mirroring Page contains the following fields:
•
Unit Number — Displays the stacking member for which the port is defined.
•
Source Port — Defines the port from which traffic is to be analyzed.
•
Type — Indicates the port mode configuration for port mirroring. The possible field values are:
–
Rx Only — Defines the port mirroring on receiving ports.
–
Tx Only — Defines the port mirroring on transmitting ports. This is the default value.
–
Tx and Rx — Defines the port mirroring on both receiving and transmitting ports.
3. Click Apply . The port mirror status indicators are updated.
4. Click Save Config on the menu to permanently save the change.
To modify or delete a port mirror:
1. Click Layer 1 > Port Mirroring . The Port Mirroring Page opens.
2. Click Modify . The Port Mirroring Configuration opens.
Figure 64: Port Mirroring Configuration