Allen-Bradley 2094-AL09, Installation Instructions Manual

Page: 51 / 60

Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
Line Interface Module 51
Table 28 - Accessories
Status Indicators The line interface module status indicators monitor the 24V output supply.
Table 29 - Troubleshooting Status Indicators
Cat. No. Description Accessory Cat. No.
2094-AL xx S, 2094-BL xx S,
and 2094-XL75S-C x
Connector Set. Includes I/O (IOL), VAC LINE (IPL), VAC LOAD (OPL), control power (CPL),
230V auxiliary output (P2L), 24V brake power (P1L), and 230V auxiliary input (APL)
replacement connectors for these catalog numbers.
2094-XNLIM-2
Mounting bracket for use when panel configuration calls for mounting the AC line filter
behind the line interface module.
2094-XNBRKT-1
Variable-depth rotary mechanism. Provides disconnect from outside the cabinet when
used with 140U device (CB1).
140U-H-RM12B
2094-AL09 and 2094-BL02
Low-profile connector kit for I/O (26-pin high density D-shell). 2090-K6CK-D26M
Connector Set. Includes VAC LINE (IPL), VAC LOAD (OPL), control power (CPL), and 24V
brake power (PSL) replacement connectors for these catalog numbers.
2094-XNLIM-1
Status Indicator Status Description
• 24V power status indicator
(1)
• Brake power status indicator
(2)
• I/O power status indicator
(2)
(1) Applies to 2094-AL xx S, 2094-BL xx S, and 2094-XL75S-C x line interface modules.
(2) Applies to 2094-AL09 and 2094-BL02 line interface modules.
Steady Green Normal, 24V power enabled
Off
(24V power disabled)
• CB3 is open. Reset CB3.
• If CB3 continues to trip, call your Rockwell
Automation representative to return module
for repair.
• Check 24V polarity. Correct polarity if
reversed.
• If polarity is correct and indicator is not
steady green, call your Rockwell Automation
representative to return module for repair.