Allen-Bradley 2094-AL09, Installation Instructions Manual

Page: 52 / 60

Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
52 Line Interface Module
Specifications This section provides power, fuse, weight, and environmental specifications for
the line interface modules.
Power Specifications
Table 30 - Power Specifications (catalog numbers 2094-AL
xx
S and 2094-BL
xx
S)
Designators Attribute
2094-AL
xx
S (230V) 2094-BL
xx
S (460V)
AL15S AL25S AL50S AL75S BL10S BL25S BL50S BL75S
VAC LINE
(IPL) connector
AC input voltage
195…265V rms 3-phase
(230V nom) 380…520V rms 3-phase
(460V nom)
AC input frequency 47…63 Hz 47…63 Hz
VAC LOAD
(OPL) connector
Main AC output current (rms) 15 A 25 A 50 A 75 A 10 A 25 A 50 A 75 A
Control power output (CPL)
connector
and
Auxiliary power output
(P2L) connector AC output current (rms) 3 A
(3)
3 A
(3)
AC output voltage
195…265V rms single-phase
(230V nom) 190…260V rms single-phase
(230V nom)
Brake power output (P1L)
connector
and
I/O (IOL) connector
24V DC power supply 20 A
(4)
20 A
(4)
Contactor (CR1)
Contactor control voltage
(1)
21.6…26.4V DC 21.6…26.4V DC
Contactor control current
(1)
12…9 mA 12…9 mA
Contactor pickup current
(2)
N/A (Internal) N/A (Internal)
Contactor hold-in current
(2)
N/A (Internal) N/A (Internal)
Contactor voltage N/A (Internal) N/A (Internal)
Contactor pickup time 18.5 ms (min) 30.0 ms (max) 18.5 ms (min) 30.0 ms (max)
Contactor dropout time 10.0 ms (min) 60.0 ms (max) 10.0 ms (min) 60.0 ms (max)
(1) Power specifications for DC-interface module (100 JE) COIL_E1 and COIL_E2 input.
(2) Current provided by auxiliary VAC input.
(3) Sum of CPL and P2L current must not exceed 3 A.
(4) Sum of P1L and IOL current must not exceed 20 A.