Allen-Bradley 1794-IE8H, User Manual, Page: 82 / 146

Publication 1794-UM063A-EN-P - March 2006
5-14 Calibrate Your Module
Table 5.11 1794-OE8H Interpretation of Calibration Data Structure Content During Read Access (Idle Status)
Command Byte Item Byte Data1 Byte Data2 Byte
Status (Binary) Command Bits 0…5 (Decimal)
00 Idle 0 Nothing is done. The state after power on. 0 0 0
1 The min scale value is supported at the outputs according
to channel-mask Channel-mask
2 The max scale value is supported at the outputs
according to channel-mask
3 The written min scale value of Current was accepted Value
low-byte Value
high-byte
4 The written min scale value of Voltage was accepted
5 The written max scale value of Current was accepted
6 The written max scale value of Voltage was accepted
7
Reserved
(1)
Reserved
(1)
Reserved
(1)
Reserved
(1)
8 All calibration values are set to default 0 0 0
9 The specified calibration value is set to default Value-identifier
10
Reserved
(2)
Reserved
(2)
Reserved
(2)
Reserved
(2)
11
Reserved
(2)
12
Reserved
(2)
13
Reserved
(2)
14 The calibration content is saved to EEPROM. 0 0 0
(1)
Do not use. Designated for future use.
(2)
Reserved. Used during manufacture of the product.