Allen-Bradley 1420-V1 User Manual Download Page 90 | Manualshive

Page: 90 / 90

Allen-Bradley 1420-V1 User Manual Download Page 90

Publication 1420-UM001E-EN-P - March 2016

PN-XXXXXX-XX

Supersedes Publication 1420-UM001D-EN-P - September 2013

Copyright © 2016 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Rockwell Automation Support

Use the following resources to access support information.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at

http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf

.

Technical Support Center

Knowledgebase Articles, How-to Videos, FAQs, Chat, User
Forums, and Product Notification Updates.

https://rockwellautomation.custhelp.com/

Local Technical Support Phone Numbers

Locate the phone number for your country.

http://www.rockwellautomation.com/global/support/get-support-now.page

Direct Dial Codes

Find the Direct Dial Code for your product. Use the code to
route your call directly to a technical support engineer.

http://www.rockwellautomation.com/global/support/direct-dial.page

Literature Library

Installation Instructions, Manuals, Brochures, and
Technical Data.

http://www.rockwellautomation.com/global/literature-library/overview.page

Product Compatibility and Download
Center (PCDC)

Get help determining how products interact, check
features and capabilities, and find associated firmware.

http://www.rockwellautomation.com/global/support/pcdc.page

.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Rockwell Automation maintains current product environmental information on its website at

http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page

.

Allen-Bradley, Rockwell Software, Rockwell Automation, PowerMonitor, FactoryTalk EnergyMetrix, RSNetWorx, CompactLogix, ControlLogix, RSLinx, RSLogix, and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

«
...
88
89
90

Summary of Contents for 1420-V1



























































































Reviews:

No comments