Allen-Bradley 1420-V1, User Manual, Page: 31 / 90

Rockwell Automation Publication 1420-UM001E-EN-P - March 2016 31
Unit Configuration Chapter 3
•
210 AN OUT 1: User programming of the analog
outputs (0…20 mA).
–
211 VARIABLES: selects the variable to be
retransmitted with the analog output.
–
212 MIN OUTPUT: sets the value that is expressed
as % of the output range (0…20 mA) that
corresponds to the minimum measured value.
–
213 MAX OUTPUT: selects the value that is
expressed as % of the output range (0…20 mA) that
corresponds to the maximum measured value.
–
214 MIN INPUT: minimum value of the variable
input range, corresponds to the ‘MIN OUTPUT’
value of the analog output.
–
215 MAX INPUT: maximum value of the variable
input range corresponds to the ‘MAX OUTPUT’
value of the analog output.
•
230 METERS: reset the ENERGY METERS.
Choose among the following:
–
231 TOTAL, 222 PARTIAL: resets all energy
meters, total and partial.
–
233 TOTAL +: resets the total meters of imported
energy.
–
234 TOTAL -: resets the total meters of exported
energy.
–
235 P: resets the partial meters of
imported energy.
–
236 PARTIAL -: resets the partial meters of
exported energy.
•
240 RESET: Resets the MAX or dmd stored values.
•
250 CLOCK:
–
251 FORMAT: UE, sets the European time format
as 24h (00:00) or sets the time format as 12h (12:00
AM/PM).
–
252 YEAR: sets the current year.
–
253 MONTH: sets the current month.
–
254 DAY: sets the current day.
–
255 HOUR: sets the current hour.
–
256 MINUTE: sets the current minute.
–
257 SECOND: sets the current second.
•
260 END:
–
To save programming changes, press Program/select.
–
To exit the Programming mode without saving any
changes, press Exit and confirm by pressing
Program/select.
–
If no buttons are pressed for two minutes, the unit
exits Programming mode without saving changes.
Save the set
parameters and come
back to the measuring
mode.
List of available
variables
Same as AN OUT 1