Allen-Bradley 1420-V1, User Manual, Page: 14 / 90

14 Rockwell Automation Publication 1420-UM001E-EN-P - March 2016
Chapter 1 PowerMonitor 500 Unit Overview
Selecting Data to Display Table 1 and Table 2 provide a guide to navigation through the metering data
displays available on the front panel display. Row 1…Row 5 indicate the rows of
the display (see
Figure 2 on page 13 ).
Press for <2 seconds to cycle through the data that is displayed in Row 1
of the display.
Selected data for Row 1 remains displayed until is pressed.
Press for <2 seconds to cycle through the data that is displayed in Rows
2…5 of the display.
Selected data for Rows 2…5 displays momentarily and then returns to the default
display.
Use and to cycle through the max, instantaneous, and demand
(dmd) values.
Table 1 - Row 1 Data
Parameters 1 2 3 4 5 6 7 8 9 10
Row 1 Total kWh
(+) Total kVARh
(+) Total kWh (-
) Total kVARh
(-) kWh (+)
part. kVARh (+)
part. kWh (-)
part. kVARh (-)
part. Run Hours
(99999999.99) RTC
IMPORTANT
The appropriate data is displayed based on the configured system. For
example, for delta (3P) systems, individual line data is not displayed for line-
to-neutral voltage, VA, VAR, W, and power factor.
Table 2 - Rows 2…5 Data
Parameters Set 0 1 2 3 4 5 6 7
Row 2 V LN
Σ
V LL
Σ
An Hz VA
Σ
VAR
Σ
W
Σ
PF
Σ
Row 3 V L1 V L1-2 A L1 - VA L1 VAR L1 W L1 PF L1
Row 4 V L2 V L2-3 A L2 - VA L2 VAR L2 W L2 PF L2
Row 5 V L3 V L3-1 A L3 - VA L3 VAR L3 W L3 PF L3