Alicat Scientific MC Series Operating Manual Download

Page: 84 / 98

Technical Data for Alicat MCQ and MCRQ Mass Flow Controllers

0 to 0.5 sccm Full Scale through 0 to 3000 slpm Full Scale

Standard Operating Specifications (Contact Alicat for available options)

Performance

MCQ & MCRQ Mass Flow Controller

Accuracy at calibration

conditions after tare

± 2% of Full Scale

Repeatability

± 0.2% Full Scale

Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

2% to 100% Full Scale / 50:1 Turndown

Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)

Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

Communications / Power

MCQ & MCRQ Mass Flow Controller

Monochrome LCD or Color TFT

Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input/Output Signal

Options

RS-232 Serial / RS-485 Serial / Modbus / EtherNet IP / DeviceNet / PROFIBUS

Analog Input/Output Signal

Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Analog

Input/Output Signal

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8 Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6 pin locking

Supply Voltage

MCQ:

12 to 30 Vdc (15-30 Vdc for 4-20 mA

outputs)

MCRQ:

24 to 30 Vdc

Supply Current

MCQ

: 0.250 Amp

MCR

:Q 0.750 Amp (

MCRQH

: 2.0 Amp)

1. The

Digital Output Signal

communicates Mass Flow, Volumetric Flow, Pressure and Temperature

2. The

Analog Output Signal

and

Optional Secondary Analog Output Signal

communicate your choice of Mass

Flow, Volumetric Flow, Pressure or Temperature

Operating Conditions

MCQ & MCRQ QMass Flow Controller

Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius

Humidity Range (Non–Condensing)

0 to 100%

Max. Internal Pressure (Static)

145 psig

Proof Pressure

175 psig

Mounting Attitude Sensitivity

MCQ:

None

MCRQ:

Mount with valve cylinder vertical & upright

Valve Type

Normally Closed

Ingress Protection

IP40

Wetted Materials

MC:

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced

Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless

Steel, Silicon, Glass.

MCR:

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Rein-

forced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, 416 Stainless Steel,

Silicon, Glass. If your application demands a different material, please contact Alicat.

Range Specific Specifications

Full Scale Flow Mass

Controller

Pressure Drop

at FS Flow

(psid) venting to atmosphere

Mechanical

Dimensions

Process Connections

MCQ

0.5 sccm to 50 sccm

1.0

4.4”H x 3.4”W x 1.1”D

M-5 (10-32) Female Thread

MCQ

100 sccm to 500 sccm

1.0

4.6”H x 3.6”W x 1.1”D

1/8” NPT Female

MCQ

1 slpm

1.5

MCQ

2 slpm

3.0

MCQ

5 slpm

2.0

MCQ

10 slpm

5.5

MCQ

20 slpm

20.0

MCRQ

50 slpm

2.0

5.7”H x 7.7”W x 2.3”D

1/4” NPT Female

MCRQ

100 slpm

3.2

MCRQ

250 slpm

2.4

6.0”H x 7.7”W x 2.3”D

1/2” NPT Female

MCRQ

500 slpm

6.5

6.0”H x 7.3”W x 2.3”D

3/4” NPT Female

(A 1-1/4” NPT Female process

connection is available for

2000 slpm controllers.)

MCRQ

1000 slpm

14.0

MCRQ

1500 slpm

17.0

MCRQ

2000 slpm

28.6

6.0”H x 8.1”W x 2.9”D

MCRQH

3000 slpm

16.8

6.0”H x 8.9”W x 2.9”D

1-1/4” NPT Female

2. Compatible with Swagelok® tube, Parker®, face seal, push connect and compression adapter fittings. VCR and SAE

connections upon request.

3. Shipped with M-5 (10-32) Male Buna-N O-ring face seal to 1/8” Female NPT fittings.

Alicat MCQ and MCRQ units are for high pressure applications.

The flow rate is dependent on the pressure in that lower

pressures will yield lower flow rates. The Q series should only be ordered after consulting Alicat. MCQ units are calibrated

for operation at high pressure. Optimal performance is achieved at higher operating pressures.

Minimum Operating Pressure – 30 psia

Maximum Operating Pressure – 320 psia

Summary of Contents for MC Series



































































































Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands

Alicat Scientific MC Series, Operating Manual

Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands