20
PID TUNING
PID Values determine the performance
and operation of your proportional control
valve. These terms dictate control speed,
control stability, overshoot and oscillation.
All units leave the factory with a generic
tuning designed to handle most applications.
If you encounter issues with valve stability,
oscillation or speed, fine tuning these
parameters may resolve the problem.
Alicat controllers allow you to adjust the
Proportional, Integral and Differential
terms of the PID control loop.
To change the PID loop parameters, push
the button below
PID
.
Press
LOOP TYPE.
Then use the UP and
DOWN buttons to select the appropriate
PID control algorithm. Press SET.
See the following page for descriptions
of the PID Loop Types (PID Control
Algorithms).
P
refers to the Proportional term of the
PID loop.
I
refers to the Integral term of the PID loop.
D
refers to the Differential term of the PID
loop.
Press P, I or D. Then use SELECT to choose
the digit with the arrow and the UP and
DOWN buttons to change the value. Press
SET to record your value. Press CLEAR to
return to zero.
Before changing the P, I or D
parameter, please record the initial
value so that it can be returned to
the factory setting if necessary.
Valve tuning can be complex. If you
would like assistance, please contact
Alicat for technical support.
BACK
LOOP
TYPE
MAIN
P
00100
D
05000
LOOP
VAR
PID
MAIN
SETPT
SOURCE
SETPT
+0.0
Overview of PID Adjustment on Alicat MFCs and Pressure Controllers
http://www.alicat.com/support/instructional-videos/
BACK
DOWN
CANCEL
SET
UP
> PD /PID CONTROL
PD2I PID CONTROL
