Alicat Scientific MC Series Operating Manual Download

Page: 70 / 98

Technical Data for MCV & MCVS Mass Flow Controllers

0 to 0.5 sccm Full Scale through 0 to 20 slpm Full Scale

The Alicat

MCV

mass flow controller is designed for applications that require tight shut-off such as vacuum

coating and sputtering processes. An integrated pneumatic shut-off valve is normally closed and provides

positive shut-off of 1 x 10

-9

atm scc/sec Helium max.

MCVS

controllers are for use with aggressive gases.

Performance

MCV Mass Flow Controller

MCVS Mass Flow Controller

Accuracy at calibration conditions

after tare

± (0.8% of R 0.2% of Full Scale)

High Accuracy at calibration

conditions after tare

± (0.4% of R 0.2% of Full Scale)

High Accuracy option not available for units ranged under 5 sccm.

Repeatability

± 0.2% Full Scale

Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown

Ratio

0.5% to 100% Full Scale / 200:1

Turndown

1% to 100% Full Scale / 100:1

Turndown

Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)

Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

Integrated Valve Leak Integrity

1 x 10

-9

atm scc/sec Helium max

Standard Specifications (Contact Alicat for available options.)

Operating Conditions

MCV Mass Flow Controller

MCVS Mass Flow Controller

Mass Reference Conditions

(STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius

Humidity Range (Non–

Condensing)

0 to 100%

Max. Internal Pressure (Static)

145 psig

Proof Pressure

175 psig

Mounting Attitude Sensitivity

None

Valve Type

Normally Closed

Ingress Protection

IP40

Wetted Materials

MCV:

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Rein-

forced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR

Stainless Steel, Silicon, Glass.

MCVS:

316LSS, 303SS, 430FRSS, FFKM (Kalrez) standard, Viton, EPDM, Buna,

Neoprene as needed for some gases.

If your application demands a different material, please contact Alicat.

Communications / Power

Whisper MCV & MCVS Mass Flow Controller

Monochrome LCD or Color TFT

Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input/Output Signal

Options

RS-232 Serial / RS-485 Serial / Modbus / EtherNet IP / DeviceNet / PROFIBUS

Analog Input/Output Signal

Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Analog

Input/Output Signal

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8 Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6 pin locking

Supply Voltage

12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)

Supply Current

0.250 Amp

1. The

Digital Output Signal

communicates Mass Flow, Volumetric Flow, Pressure and Temperature

2. The

Analog Output Signal

and

Optional Secondary Analog Output Signal

communicate your choice of Mass

Flow, Volumetric Flow, Pressure or Temperature

Range Specific Specifications

Full Scale Mass Flow Controller

Mechanical Dimensions

Process Connections

MCV

0.5SCCM to 20SLPM

4.8”H x 6.8”W x 1.5”D

1/4” VCR® Male

MCVS

0.5SCCM to 20SLPM

5.5”H x 6.8”W x 1.5”D

1/4” VCR® Male

Welded VCR® process connections are recommended for MCV and MCVS applications. Please contact Alicat.

Summary of Contents for MC Series



































































































Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands

Alicat Scientific MC Series, Operating Manual

Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands