14
#C
+21.50
+0.00
CCM
TOTAL/
MENU
SETPT
0.000
SCCM
Air
PSIA
+13.60
+0.00
SCCM
Main
+0.00
SETPT
0123.4
MENU/
MAIN
SCCM
+123.4
TOTAL/
TIMER
REMAIN
RESET
2:05 h:m:s
00123.45
Scm3
The
Main
display shows pressure,
temperature, setpoint, volumetric flow
and mass flow.
Pressing the button adjacent to a
parameter will make that parameter
the primary display.
By hitting the
MENU
button at the
bottom right of the screen you will
enter the
Select Menu
display.
If your controller was ordered with the
Totalizer option (page 52), pushing the
TOTAL/MENU button once will bring up
the
Totalizing Mode display. Pushing
MENU/MAIN will bring up the
Select
Menu
display.
DISPLAYS AND MENUS
The device screen defaults to
Main
display as soon as power is applied to the controller.
Note: See page 31 to rotate the display 180°.
Select Menu
From
Select Menu
you can change
the selected gas, interact with your
RS-232 / RS-485 settings, read
manufacturer’s data or access the
control set-up display.
Push
MAIN
to return to the Main display.
Display On/Off:
Pushing the button under the Alicat name
will turn the device display back light on
or off.
Totalizer (option only)
ADV
SETUP
TARES
ABOUT
MAIN
CONTROL
BASIC
CONFIG
Select Menu
