24
BASIC CONFIG
Press
BASIC CONFIG
to select gases, device units,
and change STP and NTP references.
Press
BACK
to return to the Select Menu
display. Push
MAIN
to return to the Main
display.
Gas Select
allows you to set your device to
up to 150 gases and mixes. You can also use
COMPOSER
to program and store up to 20
gas mixes.
Gas Select
is accessed by pressing the button
above
GAS
on the
BASIC CONFIG
display.
To select a gas, use the UP and DOWN buttons
to position the arrow in front of the desired gas
category.
»
Recent: Eight most recent selections
»
Standard: Gases and mixes standard on
earlier Alicat instruments (page 39)
»
Factory Custom: Present only if customer
requested gases were added at the factory
»
COMPOSER User Mixes: Gas mixes
programmed by the user (page 25)
»
Bioreactor (page 43)
»
Breathing (page 44)
»
Chromatography (page 46)
»
Fuel (page 45)
»
Laser (page 45)
»
O2 Concentrator (page 46)
»
Pure Corrosive* (page 40)
»
Pure Non-Corrosive (page 39)
»
Refrigerant* (page 40)
»
Stack (page 46)
»
Welding (page 42)
Press PAGE to view a new page in the gas
category list.
Press SELECT to view the gases in the selected
category. Align the arrow with the desired gas.
Press SET to record your selection and return
to the MAIN display. The selected gas will be
displayed on the screen.
*
Pure Corrosive and Refrigerant gases are only available on
S-Series
instruments
that are compatible with these gases. Not all S-series instruments are compatible
with all aggressive gases.
Note: Gas Select may not be available on units ordered with a custom gas or blend.
See pages 39 -46 for a full list of gases in each category.
DEVICE
UNITS
BACK
MAIN
STP/
NTP
GAS
N2
DOWN
BACK
SELECT
PAGE
>Recent
Standard
Factory Custom
COMPOSER User Mixes
Bioreactor
Breathing
Chromatography
Fuel
UP
DOWN
CANCEL
SET
PAGE
> Fuel
Laser
O2 Concentrator
Pure Corrosive
Pure Non-Corrosive
Refrigerant
Stack
Welding
UP
