Alicat Scientific MC Series Operating Manual Download

Page: 59 / 98

Technical Data for Alicat MC and MCR Mass Flow Controllers

0 to 0.5 sccm Full Scale through 0 to 5000 slpm Full Scale

Standard Operating Specifications (Contact Alicat for available options)

Performance

MC & MCR Mass Flow Controller

Accuracy at calibration

conditions after tare

± (0.8% of R 0.2% of Full Scale)

High Accuracy at calibration

conditions after tare

± (0.4% of R 0.2% of Full Scale)

High Accuracy option not available for units ranged under 5 sccm or over 500 slpm.

Repeatability

± 0.2% Full Scale

Zero Shift and Span Shift

0.02% Full Scale / ºCelsius / Atm

Operating Range / Turndown Ratio

0.5% to 100% Full Scale / 200:1 Turndown

Maximum Controllable Flow Rate

102.4% Full Scale

Maximum Measurable Flow Rate

up to 128% Full Scale (Gas Dependent)

Typical Response Time

100 ms (Adjustable)

Warm-up Time

< 1 Second

Communications / Power

MC & MCR Mass Flow Controller

Monochrome LCD or Color TFT

Display with integrated touchpad

Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature

Digital Input/Output Signal

Options

RS-232 Serial / RS-485 Serial / Modbus / EtherNet IP / DeviceNet / PROFIBUS

Analog Input/Output Signal

Options

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Optional Secondary Analog

Input/Output Signal

0-5 Vdc / 1-5 Vdc / 0-10 Vdc / 4-20 mA

Electrical Connection Options

8 Pin Mini-DIN / 9-pin D-sub (DB9) / 15-pin D-sub (DB15) / 6 pin locking

Supply Voltage

MC:

12 to 30 Vdc (15-30 Vdc for 4-20 mA outputs)

MCR:

24 to 30 Vdc

Supply Current

: 0.250 Amp

MCR

: 0.750 Amp (

MCRH

: 2.0 Amp)

1. The

Digital Output Signal

communicates Mass Flow, Volumetric Flow, Pressure and Temperature

2. The

Analog Output Signal

and

Optional Secondary Analog Output Signal

communicate your choice of Mass

Flow, Volumetric Flow, Pressure or Temperature.

Operating Conditions

MC & MCR Mass Flow Controller

Mass Reference Conditions (STP)

25ºC & 14.696 psia (standard — others available on request)

Operating Temperature

−10 to +60 ºCelsius

Humidity Range (Non–Condensing)

0 to 100%

Max. Internal Pressure (Static)

145 psig

Proof Pressure

175 psig

Mounting Attitude Sensitivity

MC:

None

MCR:

Mount with valve cylinder vertical & upright

Valve Type

Normally Closed

Ingress Protection

IP40

Wetted Materials

MC:

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Reinforced

Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, Brass, 430FR Stainless

Steel, Silicon, Glass.

MCR:

303 & 302 Stainless Steel, Viton®, Heat Cured Silicone Rubber, Glass Rein-

forced Polyphenylene Sulfide, Heat Cured Epoxy, Aluminum, Gold, 416 Stainless Steel,

Silicon, Glass. If your application demands a different material, please contact Alicat.

Range Specific Specifications

Full Scale Flow Mass

Controller

Pressure Drop

at FS Flow

(psid) venting to atmosphere

Mechanical

Dimensions

Process Connections

0.5 sccm to 50 sccm

1.0

3.9”H x 3.4”W x 1.1”D

M-5 (10-32) Female Thread

100 sccm to 500 sccm

1.0

4.1”H x 3.6”W x 1.1”D

1/8” NPT Female

1 slpm

1.5

2 slpm

3.0

5 slpm

2.0

10 slpm

5.5

20 slpm

20.0

MCR

50 slpm

2.0

5.5”H x 7.7”W x 2.3”D

1/4” NPT Female

MCR

100 slpm

3.2

MCR

250 slpm

2.4

5.5”H x 7.7”W x 2.3”D

1/2” NPT Female

MCR

500 slpm

6.5

5.5”H x 7.4”W x 2.3”D

3/4” NPT Female

(A 1-1/4” NPT Female process

connection is available for

2000 slpm controllers.)

MCR

1000 slpm

14.0

MCR

1500 slpm

17.0

MCR

2000 slpm

28.6

5.5”H x 8.1” W x 2.9” D

MCR

3000 slpm

16.8

5.5”H x 8.9” W x 2.9” D

1-1/4” NPT Female

MCRH

5000 slpm

14.1

6.3”H x 9.8”W x 4.5”D

2” NPT Female

1. Lower Pressure Drops Available, please see our

WHISPER-Series

mass flow controllers at

www.alicat.com/whisper

2. Compatible with Swagelok® tube, Parker®, face seal, push connect and compression adapter fittings. VCR and SAE

connections upon request.

3. Shipped with M-5 (10-32) Male Buna-N O-ring face seal to 1/8” Female NPT fittings.

Summary of Contents for MC Series



































































































Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands

Alicat Scientific MC Series, Operating Manual

Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands