Alicat Scientific MC Series Operating Manual Download

Page: 13 / 98

Information for Alicat TFT (Color Display) Instruments

Alicat TFT (color display) instruments have a high contrast back-lit LCD display.

TFT instruments operate in accordance with Alicat standard operating instructions

for our monochrome menus and displays with the following differences.
Multi-Color Display Color Codes:

GREEN

: Green labels identify the parameters and/or adjustments

associated with the button directly above or below the label.

WHITE

: The color of each parameter is displayed in white while operating

under normal conditions.

RED

: The color of a parameter is displayed in red when operating

conditions for that parameter exceed 128% of the device’s specifications.

YELLOW

: Yellow is the equivalent of the selection arrow on the

monochrome display.

LCD Contrast:

LCD contrast is ranged from 0 to 11 on color displays with 11 being the greatest

contrast.

Technical Data for TFT (Color Display) Meters, Gauges and Controllers

The following specifications are applicable to Alicat

TFT

(color display) meters,

gauges and controllers only. All other operating specifications are shown in the

Technical Data page for standard Alicat instruments. All standard device features

and functions are available and operate in accordance with the Alicat operating

manual provided with the device.

Specification

Meter or

Gauge

Small Valve

Controller

Large Valve

Controller

Supply Voltage

7 to 30 Vdc

12 to 30 Vdc

24 to 30 Vdc

Supply Current

80 mA @ 12Vdc

70 mA @ 24Vdc

290 mA @ 12Vdc

200 mA @ 24Vdc

780 mA @

24Vdc

Summary of Contents for MC Series



































































































Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands

Alicat Scientific MC Series, Operating Manual

Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands